|Carton from Ikebe-Gakki|
This is my first time dealing with Ikebe-Gakki and I must applaud them for the quality of their communication and their prompt replies to my emails. They only accept payments by bank wire transfer for purchases from outside Japan, though, making a schlep to the bank to fill out forms necessary.
The EVH Striped Series guitars ship in a softcase so I requested that they pack the guitar with extra layers of bubblewrap to ensure it got to me in one piece.
And did they pack it well!
The guitar was shipped thoroughly bubble-wrapped and double-boxed. And despite the Floyd Rose nut not being locked, the guitar was actually pretty much in tune when I took it out of the softcase, with only the G and the B strings slightly flat. Ikebe-Gakki will definitely be seeing more business from me in the near future.
|Carton within a carton and generous amount of bubblewrap!|
The Mexican-made EVH Striped Series is manufactured in Fender's Ensenada factory. Fender Mexico has really upped their game in recent years -- the Roadworn series in particular, stick out as very well-made instruments with tons of vibe. In my opinion they gave more bang for the buck than any relic'd guitar from the Fender Custom Shop.
Eddie Van Halen is well-known for being very hands-on with the design of every guitar model that bears his name, choosing wood combinations, hardware and voicing pickups.
He is also legendary for giving guitar manufactures a hard time whenever he visits a factory, simultaneously striking fear and a sense of awe into the hearts of those who happen to be tweaking guitars in the final setup department on that particular day.
|It's here! Shrouded in mystery|
I reckon it was his early experience with Kramer in the 80's where only his name and likeness were used in ad campaigns to sell guitars, with virtually no creative input from Eddie himself, that set him on a tangent of being very involved in the design and manufacture of every one of his guitars and amplifiers, from Ernie Ball/Musicman, to Peavey, and now, Fender EVH. In all honesty, I can't recall ever having played a bad guitar or amplifier that had Eddie's mark on it.
To think that Kramer missed out on a golden opportunity, all those years ago, to recreate an Eddie Van Halen signature model, stripes and all!
But on to the review.
EVH Striped Series Main Features
The EVH Striped Series guitars are available in three color combos -- black stripes on white, yellow stripes on black, and the iconic red, white and black.
All models feature a hand-rubbed, oil-finished quartersawn maple neck with built-in graphite reinforcement rods, an easy access trussrod adjustment wheel at the base of the neck, Stratocaster headstock, jumbo frets, EVH-branded tuners, basswood body, Wolfgang humbucking pickup, single volume control via an EVH-branded 500k low-friction pot, and side-mounted output jack.
Of course, the Striped series just wouldn't be EVH enough without a Floyd Rose bridge.
Oil-Finished Neck With Graphite Reinforcement
|Quartersawn neck with 'quarter flowers'|
All EVH Striped Series guitar necks are carved from quartersawn wood for the simple reason that quartersawn necks are much more resistant to twisting and warping than flatsawn necks. And if you're dealing with an oil-finished neck, quartersawn is much more stable and definitely the way to go. You can tell a quartersawn neck from flatsawn by the vertical grain pattern and visible row of 'quarter flowers' running down the centre of the neck.
And to make doubly sure the neck on your EVH guitar lasts through years of sweaty gigs, the built-in graphite reinforcement rods add even more stability. Graphite is so stable that some companies like Vigier guitars have even done away with trussrods entirely, relying on graphite rods to keep their necks stable and fingerboard relief constant.
The Neck of Legend!
The first thing that struck me when I picked up the EVH Striped Series was the neck profile. This is the neck that vanished from the face of the earth!
In 1987, when Ibanez released the first Steve Vai JEM guitars in that lurid Loch Ness Green, I remember trying one out and being immediately amazed by the profile and feel of the neck. Even before plugging it in, I wrapped my hand around that neck and I just knew.
But the mystic, magical properties of the original Loch Ness Green neck was forever lost after that limited run of seven hundred and seventy seven guitars. The many subsequent incarnations of the JEM series did not use the same neck profile as the Loch Ness and I could never understand why. It was as if someone decided to simply can it, the blueprints relegated to some secret archive in the Hoshino factory.
Or Steve Vai's basement.
I was really happy when I reached into the softcase to pull out my guitar. There are some things you just cannot forget. The neck profile on the EVH Striped Series is exactly like the one on the almost mythical Loch Ness JEM!
The EVH's neck profile can best be described as a slim 'C', with beautifully rounded, rolled fingerboard edges. The glued-on maple fingerboard features a compound radius that goes from a Gibson-like 12" at the nut, to a very flat 16" at the fingerboard end, allowing for super-low action without fretting out when bending strings. I'm not an ultra-low action kinda guy -- I like a teeny bit of fight from the strings but they must still be low enough for me to throw in the occasional right-hand tapped legato run with ease.
But just for a lark, I brought the EVH Floyd Rose down about as low as it would go, and the guitar still played very evenly, with no odd chokes or fret-outs at random points indicating that some fret were higher than others. Kudos to Fender Mexico for the stellar fretwork. And did I mention that the jumbo frets on this guitar were polished to a chrome-like, mirror shine?
While waiting for my guitar to arrive in the mail, I came across a few negative reviews on a couple of guitar forums that said that the EVH Striped Series guitars came with sharp fret ends. This was not my experience with my own guitar, but I can understand why this might be the case for some.
As I mentioned earlier, oil-finished maple necks are sometimes prone to expansion and contraction, depending on relative humidity. If the guitar has been stored in a relatively dry environment for several weeks, the wood is likely to contract, causing the fret ends to protrude slightly. Some guitar manufacturers cut the fret tangs a little shorter at the fingerboard ends for this very reason. Fortunately this is something that can be easily fixed by any competent luthier or repairman. A quick buff of the fret ends with a fret rounding file, a dash of linseed oil to restore the finish on the fingerboard edges, and you're done.
So what's with all the hype about oil-finished necks?
To put it simply, oil-finished necks feel as smooth as butter -- much smoother and silkier to the touch than any kind of man-made polyurethane satin finish. But like it or not, when the naturals oils from the hand react with the wood of the neck, it will start to darken up in some areas more than others. You can pretty much analyze a guitarist's playing style and even his knowledge of the fingerboard by looking at the grime marks on an oiled maple fingerboard after a couple of years. The more evenly marked, the more it shows he uses more of the fingerboard!
On my old black Ibanez JEM 77V, I sandpapered the finish off the back of the neck in an attempt to replicate the feel of the Loch Ness JEM I mentioned earlier. Despite being lightly finished, the back of that JEM 77V neck felt unusually 'hairy' with slightly raised grain. Strange.
To counter the hairy, slightly rough feel, I buffed it down with very fine sandpaper and applied several coats of Warwick beeswax to seal the wood. I checked just now, and the contents of that one-and-a-half-decade old can of beeswax had solidified into clumps that resemble a broken yellow candle.
Guess I'll stick to Dr Duck's AxWax for general maintenance of the EVH neck.
That, and as Ritchie Fliegler mentions in his book The Complete Guide To Guitar And Amp Maintenance, regular wipings of the back of the neck with oil from the forehead every morning!
How's that for a personalized guitar?
After playing the EVH for a couple of days at home and at one of my regular Monday night gigs, the fingerboard is starting to darken up in the more well played areas. Not so much from finger grime, mind you, but from the black carbon residue from the factory-installed strings. My fingertips were literally a gun-metal grey from playing the guitar out of the box for a couple of hours when it first arrived. Ok, maybe there was a wee bit of grime involved.
Before my guitar arrived I thought about taking some fine steel wool to the body to take away some of that glossy shine off from the polyurethane finish. Now that the guitar is in my hands, I kinda don't have the heart to. But I think that as the oil-finish starts to dirty up some more, it will save me from having to relic the body in any way -- a well-played dirtied up neck will take the eye away from the 'too new' poly finish body. And we all know how awful it looks when a poly finish guitar body is relic'd.
|EVH Floyd Rose with D-Tuna|
EVH-Floyd Rose Tremelo System with D-Tuna
The EVH Striped Series just wouldn't look right without a Floyd Rose trem system.
And the EVH-branded Floyd Rose that comes standard on these guitars is not some licensed cheap knock-off. According to the Floyd Rose website, the EVH Floyd is exactly the same as the German-made Floyd Rose Original, except that it is made in Korea. Same specs, different country of manufacture.
As stated on their website also, the EVH Floyd is OEM and made exclusively for the EVH line of guitars, meaning that you can't buy an EVH-branded Floyd Rose off the shelf. But if you do want to buy one, the equivalent model would be the Korean-made Floyd Rose 1000 series.
And you've got to give it to the Koreans. Aside from the hex wrenches needed for the bridge and locking nut screws, they even provided an additional regular length string lock screw and one more longer string lock screw that fits the D-Tuna!
|Obligatory hex wrenches and complimentary string lock screws|
Which means also, that if you do not wish to have the D-Tuna installed, you can remove it and install the shorter string lock screw in its place, for a more traditional Floyd Rose look.
A nice touch!
Like the Floyd Rose Original, the EVH Floyd features hardened steel saddles and baseplate, nickel-plated brass trem block, a stainless steel tremelo arm and a locking nut to clamp the strings down
The EVH-branded Floyd Rose tremelo also comes with a D-Tuna that allows you to instantly drop the low E string to a low D, just by pulling out on the knurled post attached to the low E string's locking screw.
I'm leaving the D-Tuna on mine for now to see how it works out in a live playing situation. If not, then it's back to floating the trem and removing the D-Tuna.
For good measure, and to ensure that there was minimal friction at the fulcrum points, I applied Rene Martinez's GraphitAll guitar lube to the Floyd's bridge posts and knife edges, really getting it in there with a toothpick.
EVH Striped Series Finish
The stripes on the EVH finish were sprayed on one by one, in layers.
A painstaking process no doubt, which probably went something like this:
- Over an undercoat of primer, the body was first sprayed black.
- The black base coat was taped up and the entire body was sprayed white. When the tape was removed, the result was black stripes on a white body.
- More tape was applied and red paint was sprayed, again over entire body.
- When the tape was removed, the final red-white-black combination was achieved.
What I find amazing is how Fender managed to replicate Eddie's original red-white-black finish down to the smallest detail, using tape just like he did. No easy task when you consider that the factory's finish department has to do exactly the same graphic on hundreds of guitars! No wonder the Striped Series is made in Mexico -- American guitar factory workers would probably have gone on strike!
|EVH striped finish back detail|
Fender could have just gone with a single template and sprayed all the different colors on all at once, but it would probably have caused the colors to run into each other, and the lines would not look quite as crisp as if they were sprayed on one by one, with each color layer allowed to dry separately. And you can see this in the finish -- the lines look slightly raised at the edges where the tape was peeled off after each color was sprayed.
EVH Wolfgang Humbucking Pickup
Earlier in his career, Eddie preferred a single humbucker screwed right into the body in the bridge
|Double Phillips screws on each side of the pickup|
True to form, the bridge EVH Wolfgang humbucking pickup is screwed right to the body, but with two smaller Phillips screws on each side of the pickup instead of just one screw on each side. This makes for a very solid mount and I can't even get the pickup to move even a tiny bit back and forth when I grab on it!
The EVH Wolfgang pickup features Alnico II magnets, have a DC resistance of 14K and are double wax-potted to ensure absolutely no microphonic squeal even at ear-shattering arena volumes.
How It Sounds
All this jibber-jabber would mean diddley-squat if the guitar didn't sound good.
When I brought my EVH Striped series to my usual Monday night gig, I was a bit worried as to how it would fare tonally, with only a bridge pickup and a single volume control.
|Low-friction 500k volume pot -- most likely a Bournes pot|
My band's repertoire is pretty wide -- Hendrix, Cream, Zeppelin, Deep Purple, Pink Floyd -- and I do a fair amount of switching between the neck and bridge pickup during songs and on solos, along with much tweaking of the tone controls.
To be honest, I didn't feel I was missing my neck pickup at all. Although to compensate, the worry wort in me decided that I needed to set each of my overdrive pedals differently, one brighter, and one much darker with the tone almost rolled off.
But I found that I was fine with just hanging with one pedal into an early '90s Marshall SL-X head and cab the entire night. The Wolfgang pickup performed admirably, cleaning up nicely when I backed it off, and really laying on the juice when cranked.
And that low-friction pot -- it'll get away from you if you're not careful!
|My guitar as it appeared on the Ikebe-Gakki site|
The EVH Striped series is, all in all, a joy to play. And if you've been jones'ing to dust off your Van Halen riffs and licks with some Floyd Rose divebombs and stratospheric harmonic screams thrown in, this guitar is for you!
Don't forget to check out these sites:
Post a Comment